The main role of the Ferroli 100 l Puffer (FBM-PC0100) for the heat pump is usually to maintain a minimum volume of water "in the circuit" at times when the heating load is very low.
This prevents short cycling of the heat pump (repeated starts/stops that shorten the life of the compressor/components) and provides a bypass to maintain minimum flow through the heat pump if most heating zones have stopped (example: underfloor heating with zone thermostats or fan coils with individual thermostats).
Both the minimum flow rate and the minimum volume of water in the circuit are required to keep the heat pump in good working order.
To a large extent, in applications involving a heat pump, such a puffer is absolutely necessary for proper operation.
Puffers are used to store thermal energy, which is then transferred to the central heating system or to the heat exchanger.
The puffers are not enamelled, so they are suitable for storing only neutral media (e.g. boiler water, glycol, etc.).
The maximum permissible operating pressure of the puffer is 3 bar (0.3 MPa).
Puffers are auxiliary for heating systems in heat pumps or boilers.
The puffers are delivered with high-quality, non-removable insulation made of hard polyurethane foam, which reduces heat loss to a minimum.
The main part of the puffer is the tank in which the heating agent is heated.
Made of steel sheet, painted on the outside with undercoat paint.
The puffers are equipped with the following hydraulic connections:
- GW 6/4 "connection - flow and return for central heating
- GW 6/4 "connection - electric heater
- GW ½ “connection - temperature sensor
- GW ½ “connection - venting
Puffer Ferroli 100 l (FBM-PC0100) for heat pump Termsoshop.ro
There are no reviews yet.